STATUS: Backordered. Orders placed now are estimated to ship in the middle of June.
Asgard 2 is the next generation of one of the most popular headphone amps in the world, boasting higher performance and convenience features such as switchable gain and preamp outputs. It’s a versatile control center for your desktop system, ideal for most headphones from IEMs to orthos, and with pre outs for powered desktop speakers.
Significantly Improved Performance
We used what we learned in Mjolnir to significantly improve Asgard 2’s performance. A high-voltage, cascoded JFET gain stage feeds a high-current Class A MOSFET output section. The 80V rails on the gain stage allow us to reduce distortion, while retaining Asgard’s no-overall-feedback design in high-gain mode.
Additional Versatility: From IEMs to Orthos to Active Monitors
Asgard 2 offers two gain settings. The low-gain mode is perfect for high-sensitivity IEMs, while the high-gain mode is ideal for most other headphones, up to and including many orthodynamics. In addition, the preamp outputs can easily be connected to powered speakers, for a complete desktop system.
Made in USA
By “made in USA,” we mean made in USA. The vast majority of the total production cost of Asgard 2—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our board house is 20 minutes away from our office in Newhall. Our chassis guys are just over the hill in the Valley.
Asgard 2 is covered by a limited warranty that covers parts and labor for five years. That’s 5 years. Yes. FIVE. Which is up to 5X that of our competition, if you weren’t so hot at math. Note the marketing weasel-wording “up to.”
15-Day Satisfaction Guarantee
Try Asgard 2 in your own house for 15 days. If you don’t like it, simply send it back for a refund, minus a 5% transaction fee. Try spending 15 days in an audio store. They’ll kick you out. Unless you buy them donuts. Maybe.
Want more info? Check out the Asgard 2 FAQ.
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB
Maximum Power, 32 ohms: 1.0W
Maximum Power, 50 ohms: 1.0W
Maximum Power, 300 ohms: 380mW
Maximum Power, 600 ohms: 190mW
THD: Less than 0.008%, 20Hz-20KHz, at 1V RMS, high gain mode (worst case)
IMD: Less than 0.010%, CCIR at 1V RMS, high gain mode (worst case)
SNR: More than 102db, unweighted, referenced to 1V RMS, in low gain mode
Crosstalk: Less than -72dB, 20Hz-20KHz
Output Impedance: Less than 2 ohms
Gain: High = 6 (15.6db) or Low = 1.5 (3.5db), via rear switch
Topology: Fully discrete, single-ended Class A with single voltage gain stage, no overall feedback in high gain mode, 12dB feedback in low gain mode
Protection: standard muting relay for delayed turn-on and fast turn-off
Power Supply: Internal power transformer with 4 separate power supply rails and over 20,000uf of filter capacitance
Power Consumption: 30W
Size: 9 x 6 x 2.25”
Weight: 5 lbs
*All measurements made on a Stanford Research SR1+ Audio Analyzer