STATUS: In stock. Orders placed now ship in 1-2 business days.
Magni is the only fully discrete headphone amp under $100 that is made in the USA. Delivering 1.2W of power into 32 ohms, Magni is ready for virtually any headphone—including many hard-to-drive orthodynamic models.
Discrete Design, DC Coupled
If you ain’t into engineering, you can probably skip this section. But it’s important. All other amps in this price range use op-amps for gain. Not Magni. It uses a discrete gain stage design, with low-noise JFET inputs, fast VAS transistors, and massive output power transistors. The result is greater current capability for higher power output. We’ve also used a DC servo to eliminate coupling caps from the signal path.
From IEMs to Orthos
Magni is quiet enough for many IEMs, but provides up to 1.2W into 32 ohms, which is plenty for many orthodynamic headphones. Magni is versatile enough to be a “do all” amplifier—it may be the only amp you ever need.
Made in USA
By “made in USA,” we mean made in USA. The vast majority of the total production cost of Magni—chassis, boards, assembly, etc—goes to US companies manufacturing in the US. Our board house is 20 minutes away from our office in Newhall. Our chassis guys are just over the hill in the Valley. Yep, the wall wart is from China, but there you go. There is some give and take to reach this price point.
Magni is covered by a limited warranty that covers parts and labor for two years. That’s 2x the coverage of most amps in this price range.
Unlike our other amps, Magni is so affordable we can’t offer the same 15-day, 5% satisfaction guarantee. But if you don’t like your Magni, you can still send it back for a refund, minus 15% restocking fee, within 15 days of receiving your amp.
Read more at the Magni FAQ Page.
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-200KHz, -3dB
Maximum Power, 32 ohms: 1.2W
Maximum Power, 50 ohms: 1.0W
Maximum Power, 300 ohms: 260mW
Maximum Power, 600 ohms: 130mW
THD: Less than 0.005%, 20Hz-20KHz, at 1V RMS
IMD: Less than 0.007%, CCIF
SNR: Greater than 100db, unweighted, referenced to 1V RMS
Crosstalk: -70dB, 20 Hz-20KHz
Output Impedance: Less than 0.1 ohms
Gain: 5 (14db)
Topology: Fully discrete FET/bipolar, Class AB, DC coupled throughout
Protection: standard failsafe DC power input and muting relay
Power Supply: “wall wart” style 16VAC transformer, regulated +/- 15V rails
Power Consumption: 4W
Size: 5 x 3.5 x 1.25”
Weight: 1 lb
*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyzer